SMART Thinking

Article by Ainslie Just CEng FIChemE

Ainslie Just provides an update on IChemE’s Programme SMART

PROGRAMME SMART (Sustainable Membership Achieved via Robust Transactions) is a group of four member-led projects designed to deliver sustainable membership growth. When it was  initiated in 2017, members were consulted and webinars were held to inform the membership of its aims.

IChemE is now beginning to deliver some of the changes and so it’s timely to provide an update on progress of the projects, and we will continue to do this via The Chemical Engineer throughout 2020.

Growing the membership

Sustainable membership growth is critical to:

  • provide more for our members;
  • benefit society;
  • remain relevant to the profession;
  • strengthen the global network of chemical engineers; and
  • increase the relevance of the Institution and the profession to decision makers.

Programme SMART is structured around the three stages of a chartered membership application, as defined by the Engineering Council’s Registration Code of Practice. By the end of 2020, all three stages will be built into a new system that will replace our existing ‘MARS’ (Membership Application Review System) process.

The Qualifications Committee acts as steering committee for Programme SMART. As Vice-President Qualifications (and a Trustee), I chair both of these, but I’m actively supported by the Chairs of both the Professional Formation Forum, Helen Fennell, and of the Education and Accreditation Forum, Rob Best.

Technical advisory groups (TAGs) were established at the beginning of the project, and are member led. They have been specifically formed to provide the required member expertise.

We’ll now share an update on each of these three stages.

Stages for Chartered membership: This figure shows the Engineering Council Qualification stage (top row); the name of the IChemE member-led group doing the work (middle row); and what the output will be (bottom row)

Stage 1: Education base

This stage includes the development of a new individual case procedure (ICP), which has been progressing well. ICP is the assessment of Stage 1, the educational base for membership for those who do not have accredited degrees, that fully meet the entrance requirements. In order to test the new procedure, we have undertaken two pilot projects and are now in the midst of a third (42 candidates have been involved in the pilot studies).

ICP will be a more welcoming and flexible replacement to the current Technical Report route and will ultimately provide a more transparent and accessible route for those without an accredited chemical engineering degree

ICP will be a more welcoming and flexible replacement to the current Technical Report route and will ultimately provide a more transparent and accessible route for those without an accredited chemical engineering degree to provide IChemE with evidence that they meet the educational requirements for both Incorporated (IEng) and Chartered (CEng) status.

We also welcome Fenella Nordquist as the first ICP Panel Chair. This panel of volunteers will be responsible for undertaking the assessment of ICP applications.

A soft launch (invitation only) will be planned to follow the third pilot (May 2020) before going fully live with ICP on IChemE’s website later in the year.

Stage 2: Initial Professional Development (IPD)

Currently, IPD assessment is part of the Competence and Commitment (C&C) report assessment in the Professional Review stage. IPD can be gained either through an employer’s IChemE Accredited Company Training Scheme (ACTS) or independently by candidates.

We are looking to introduce an Initial Professional Development (IPD) assessment stage in the application process to provide better evidence of compliance with the Engineering Council requirements as well as improve feedback and support for those who have not been through an ACTS.

It will also mean that candidates will benefit from a pre-check of their professional experience before they move to Stage 3 – this should give them confidence before they begin to work on their Competence and Commitment Report.

The process is under development and will accommodate both ACTS and non-ACTS candidates.

Stage 3: Professional review

Over the past few months, we have conducted pilots with candidates from ACTS schemes to test a revised process for processing Chartered Membership applications within three months from submission of application to receipt of result. This cuts the average time by around half – in 2016, for candidates with accredited Master’s-level degrees, the process took on average 177 days.

53 candidates were involved in the process, which was supported by a small team of membership volunteers, who carried out both the assessment of Competence and Commitment reports and the interview.

Stakeholder feedback gathered following the pilots was largely very positive and is being considered as we work to create a new Stage 3 process for all candidates (not only those from ACTS schemes).

We will continue to keep you updated on progress as the new three-stage process is developed, and formal communications about the launch will be issued closer to the time.

Article by Ainslie Just CEng FIChemE

Vice President Qualifications, Chair of the Qualifications Committee and Steering Group for Programme SMART, and a Trustee of IChemE

Recent Editions

Catch up on the latest news, views and jobs from The Chemical Engineer. Below are the four latest issues. View a wider selection of the archive from within the Magazine section of this site.