Compressor surge is a form of aerodynamic instability in axial and centrifugal compressors involving airflow oscillations in the axial direction which could result in blade fatigue or even mechanical failure.
Design methods are initiated by doing 'steady-state' calculations. However, due to the dynamic nature of the phenomenon and control responses a high-fidelity dynamic simulation of the compressor system is required for a rigorous design.
Running multiple dynamic scenarios for different configurations in order to identify the optimal design requires a considerable amount of time.
The aim of this work is the multi-objective optimization of a general-purpose multistage compressor model, integrating modeFRONTIER and AVEVA Dynamic Simulation (formerly DYNSIM), to demonstrate how a given industrial process can be optimized, ensuring stable and robust operation at low cost while saving up hours of computational time.
Join this webinar to see how to:
- Complete a multi-objective optimization of a dynamic process
-Integrate modeFRONTIER and AVEVA Dynamic Simulation
-Save many hours of computational time and engineering effort
Presenters:
Andrea Macri is the Product Manager for AVEVA Dynamic Simulation and AVEVA Control Emulations products.
Simone Genovese is ESTECO Project Manager for the Asian Market.
This webinar has been prepared by Aveva. Its content has not been reviewed, endorsed or approved by IChemE/The Chemical Engineer.
13th January 2021